iPod DOCKING

This model includes adaptors for adopting different iPod® models. If the docking port will not be used for an extended period of time, it is recommended to cover the docking port by using the "Dock Cover" insert (included).

1.Select a suitable adaptor for your iPod® and insert it into the docking area. Your iPod® can now be inserted into the docking port by placing the connector on the bottom of the iPod® onto the connector in the docking bay.

Note: Please be careful when seating the iPod into the docking to avoid damaging the 30-pin connector on iPod or docking system.

2.Press the POWER On/Off button to switch on the docking system.

3.Press the FUNCTION button repeatedly until the indicator "iPod" shows on the display. The iPod® will start playing and charging automatically.

4.Select your desired EQ and play mode in your iPod®.

5.Press the VOL +/- button on the docking system to adjust your desired volume level.

NOTE:The volume level cannot be adjusted by the volume control of your iPod® after being docked.

6. The iPod® is charging even during playback.

NOTE:The recharge function still operates in Radio, iPod and AUX mode.

7.To remove the iPod® from the unit, press and hold the PLAY/PAUSE button for three seconds to switch off the device and then gently remove it from the docking connector.

You may control the playback of your iPod® by:

Press the PLAY/PAUSE button to pause or resume the iPod® playback;

Press the iPod Skip/Search Forward or Backward button to skip to the next or previous song;

Press and hold the iPod Skip/Search Forward or Backward button for fast-forwarding or fast- rewinding during playback.

10

Page 14
Image 14
Audiovox CE710CR owner manual IPod Docking