Audiovox CE710CR DOCKING 1, AND 2, GENERATION iPod NANOS

DOCKING 1

AND 2

GENERATION iPod NANOS

First,install the iPod®Nano bracket into the CE710CR dock.

1stGeneration iPod nano:

Alignyour 1st generation iPod®Nano to the LEFT side of the opening in the

nanobracket (Figure 1 ). Make sure the 30-pin connector on the bottom of the

nanois positioned over the connector in the CE710CR dock prior to seating the

nano.Carefully slide the nano down onto the connector in order to insure a

secureconnection.

2ndGeneration iPod nano:

Alignyour 2nd generation iPod®Nano in the RIGHT of the opening in the nano

bracket(Figure 2 ). Make sure the 30-pin connector on the bottom of the nano

ispositioned over the connector in the CE710CR dock prior to seating the

nano.Carefully slide the nano down onto the connector in order to ensure a

secureconnection.

Note:Be careful not to damage the connector when docking the nano. Never use force when

dockingthe nano onto the connector.

Figure 1

Figure 2