Important Information
Network Camera Indoor Use Only
Please read this document before using the product, and save this document for future reference.
Panasonic Network Camera Website:
http://panasonic.net/pcc/products/netwkcam/
Model No.
BL-C121
(Wired Type)
(Wireless/Wired Type)
How to Use the Documentation
This manual is written for both the
Model number suffix “A” is omitted from the following model numbers shown in this document, unless necessary.
•Important Information (PDF format; printed version also included) This document. Provides general information and safety instructions for using the camera.
•Installation Guide (PDF format; printed version also included) Describes how to physically connect the camera to the power supply and network, as well how to mount or place the camera for regular use.
•Setup Guide (PDF format; printed version also included)
Describes how to set up the camera so that it can be accessed using a PC.
•Operating Instructions (HTML format)
Explains how to operate, program, and maintain the camera.
•Troubleshooting Guide (HTML format)
Provides solutions for problems you may have when using the camera.
Abbreviations
•The Network Camera is referred to as “the camera” in this document.
•The Setup
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury.
1.Read and understand all instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Attach the Safety Wire to the camera to prevent it from dropping.
6.To clean the camera lens, first remove any dust or dirt from the lens, then wipe the lens with a cotton bud.
7.Do not block any ventilation openings. Install in accordance with instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
9.Protect the AC adaptor cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the unit.
10.The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.
11.Only use attachments/accessories (such as stands) specified by the manufacturer.
12.Do not touch the unit, the LAN cable, AC adaptor, or AC adaptor cord during lightning storms.
13.Unplug the unit when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as when the AC adaptor is damaged, the unit does not operate normally, or after the unit has been dropped.
15.The camera is intended for indoor use only. Prolonged exposure to direct sunlight or halogen light may damage the image sensor.
16.For
17.Unplug this unit from power outlets if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center.
SAVE THESE INSTRUCTIONS
FCC and Other Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For
Environment:
Do not install the camera where the temperature is less than +5 °C (+41 °F) or greater than +40 °C (+104 °F). Allow 10 cm (4 inches) clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
Routine care:
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.
When you leave the unit unused for a long period of time, disconnect the AC adaptor from the outlet.
If you have any problems:
Consult an authorized Panasonic Factory Service Center.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.
FCC RF Exposure Warning:
For
–This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm (8 inches) spacing must be provided between antenna and all person's body (excluding extremities of hands, wrist and feet) during wireless modes of operation.
–This transmitter must not be
MEDICAL:
For
No responsibility will be taken by our company with respect to consequences resulting from the use, damage or both of the camera.
CR Coin Cell Lithium Battery Information:
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate
© Panasonic Communications Co., Ltd. 2008
PNQX1565ZA KK0908CM0
