HARDWARE SET UP
a. Press the back release latch down and open the keyboard as shown.
b. Lift the docking stand up from the keyboard. Push the back brace out from the docking stand until you hear a click.Then lay the docking stand down at the back of the keyboard.
c. Insert the docking stand connector into the bottom of your Pocket PC. The back brace on the docking stand will keep the unit
upright while it is connected to the keyboard.
d. The round hole at the top right corner of the keyboard is the stylus holder. You can place the stylus, point down, in the holder for convenient use of the stylus while the keyboard is open.
3
