7
Step 3
Start your car and turn on your unit to confirm that the XM Direct system is properly connected. When you tune to XM channel 1, you should see “XM Preview” on your head unit LCD, and hear that channel through your car speakers. If not, check to make sure all connections are correct or refer to the troubleshooting section of this installation guide.
Step 4
Mount and secure the PIA in a suitable location that will not interfere with the radio and will not vibrate or rattle after installation.
Step 5
Return the car stereo head unit back to its original location in the dash board, be careful with cables that you just installed so that they do not unplug or get kinked by the head unit.
Note: If you had removed screws to pull the car stereo head unit out please screw those back in.
Step 6
If you had removed the dash board during installation please return it back to its original location.
