Installing the Battery Pack:
1.First, make sure the player is in the “Power Off” mode and that the AC power supply has been disconnected.
2.Flip down the monitor.
3.Push the battery towards the rear of the player until it locks into position. The lock position is indicated by a click. The battery will fit snugly to the player.
Figure 6. Installing the DVD Player Battery
Removing the Battery Pack:
1.First, make sure the player is in the “Power Off” mode.
2.Press the release button on the side of battery.
3.Pull the battery from the rear of the player.
Figure 7. Removing the DVD Player Battery
30
