Audiovox D2017 manual General Setup, TV Display, Angle Mark, Screen Saver

N. Setup

1. General Setup Page

1)With no disc inside the player, press ‘SETUP’ to display the Main screen of the Setup Menu on the screen and “General Setup Page” appears. At

the same time, “ ” is highlighted. Press ‘SETUP’ again to exit the Setup Menu.

2)Press the or buttons to select the other menus in general setup page.

3)With “TV Display” highlighted press the ENTER button.

4)Press to enter the sub menu.

5)Press the or button to select the desired option in the sub menu and press the ENTER to confirm your selection.

6)Repeat steps 3-5 for other menus.

Note: Press to return the previous menu.

a)TV Display

*Normal/PS: When the player outputs signal to a normal TV, a nor- mal picture is shown on the full screen.

*Normal/LB: When the player outputs signal to a normal TV, a nor- mal picture is shown on the screen with a black strip at both the top and bottom of the screen.

*Wide: When the player outputs signal to a wide screen TV, a wide picture is shown on the full screen.

b)Angle Mark

*On: Allows access to the angle feature if contained on the DVD.

*Off: The unit will not display the angle mark feature.

NOTE: Not all discs contain above features. The above features are disc dependent.

b) Screen Saver

*On: Enables screen saver

*Off: Disables screen saver

*NOTE: The DVD player will enter the Screen Saver mode after ap- proximately three minutes if the same image remains on the screen.

18

PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com