O. Setup
1. General Setup Page
1)With no disc inside the player, press ‘SETUP’ to display the Main screen of the Setup Menu on the screen and “General Setup Page” appears. At
the same time, “ 
” is highlighted. Press ‘SETUP’ again to exit the Setup Menu.
2)Press the ENTER button, “TV Display” is highlighted.
3)Press the 
or 
buttons to select the other menus in general setup page.
4)Press 
to enter the sub menu.
5)Press the 
or 
button to select the desired option in the sub menu and press the ENTER to confirm your selection.
6)Repeat steps
Note: Press | to return the previous menu. |
a)TV Display
*Normal/PS: When the player outputs signal to a normal TV, a nor- mal picture is shown on the full screen.
*Normal/LB: When the player outputs signal to a normal TV, a nor- mal picture is shown on the screen with a black strip at both the top and bottom of the screen.
*Wide: When the player outputs signal to a wide screen TV, a wide picture is shown on the full screen.
b).Angle Mark
*On: The screen will show the angle mark icon. (*If an angle option is available).
*Off: The screen will not display the Angle Mark
NOTE: Not all discs contain above features. The above features are disc dependent.
c) Screen Saver
*On: Enables screen saver
*NOTE: The DVD player will enter the Screen Saver mode after ap- proximately three minutes if the same image remains on the screen. *Off: Disables screen saver (off)
20
