I.System Operation
1.Press POWER to switch the unit on or off. The switch indica- tor will light red and the unit will go to the mode last used and stored in memory.
2.Press DVD/TV/AV to select your desired mode. When switch- ing the mode, the DVD player can memorize the present play- ing point.
3.Press VOLUME UP/DOWN to raise or lower the sound level Also used to make picture adjustments in the picture select mode.
4.Each time PICture is pressed, the on screen picture adjust- ment display cycles through “adjustment bars for VOLUME, CONTRAST, BRIGHTNESS, COLOR and TINT. Then
use VOLUME UP/DOWN to raise or lower the level. This dis- play will automatically turn off if no adjustments are made within about 6 seconds, or if any other button is pressed.
5.Press MUTE to cut off all sound; pressing this button again restores sound to the previously set level. MUTE may also be released by pressing the VOLUME UP/DOWN.
J.Watching TV
1.Connect the coax cable into the build in antenna socket.
(Refer to Page 48 Item # 24)
2.With power applied to the system and the TV mode selected,
press TV/CATV on the remote control to select the regular 69- channel Broadcast TV and the
Note: Please contact your local cable provider to verify what cable standard you are on.
66
