Main Features
Front Panel Controls
1 2 | 3 | 4 | 5 | 6 | 7 | 8 |
POWER | SOURCE AUTO PRO. |
TV
MESSAGE
PLAY REC
RADIO TUNE
CHANNELVOLUME BASS BOOST OPEN RADIO BAND/AlARM OFF CLOCK SETSTORE CLOCK MODE TIMER MESSAGE MIC
20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 11 | 10 | 9 |
1.Power Indicator– Bright red when power is on.
2.Power Button – To turn the DKP102 on or off.
3.Source Button – Press this button to select from the four available sources DVD, TV , AV, Radio.
4.Auto Pro. Button – When this button is pressed, all TV channels are searched and channels that are detected with signals of sufficient levels are automatically stored in memory.
5.LCD Display Window – The LCD display shows the current time, source selected and radio station.
6.Record Button – Press this button to record up to a 2 minute message.
7.Play Button – Press this button to playback the recorded message.
8.Numeric Buttons
9.Mic – Microphone used for message recording .
10.Message Indicator – Flashes to indicate a message is waiting.
11.Timer Button – Used to set the timer function and turn off the timer buzzer when activated.
12.Clock Mode Button – Used to select the clock or alarm item to be set.
13.Store Button – Used to set the AM/FM presets into memory.
14.Radio Tune/Clock Set
–In Standby mode these buttons are used for setting hours, minutes, and to select
from 12 and 24 hour mode.
–In operation mode these buttons are used for radio tuning Up and Down.
15.Radio Band / Alarm Off Button – Radio Band selector. (Between FM1, FM2 and AM) Press this button to turn off the alarm when activated.
16.Open Button – Used to unlock the shuttle housing.
17.Bass Boost Button – Used to increase the low frequency (Bass) response.
18.Volume Up/Down Button – Used to increase and decrease the volume level.
19.Channel Up/Down Button – Used to go to the next channel Up or Down.
20.Sensor Cover – Allows the remote control to operate the DKP102 and the installed shuttle
(DT102, DT85, DT7).
5
