Audiovox FR-1438-2 Wrist Strap and Detachable Belt Clip Installation, Battery Cover R I N G Clip

BATTERY COVER

S P R I N G

CLIP

SIZE

AAAAAA

SIZE

1. Press the spring clip	2. Slide the battery cover	3. Insert batteries observing
and slide the belt clip	downward.	the polarity symbols on
upwards.		the bottom of the tray.

The following guidelines will improve performance and provide longer operating times for the FR1438-2:

1.Do not mix old and new batteries.

2.The use of alkaline-type batteries is recommended to provide the longest operating time.

3.Do not mix alkaline, standard (carbon-zinc) or rechargeable (Ni-MH) batteries.

4.If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and will void the warranty.

Wrist Strap and Detachable Belt Clip Installation

The wrist strap and detachable belt clip are provided to enable you to carry the FR1438-2 easily and safely. The wrist strap can be attached to the hole located on the top of the belt clip. Feed the small loop on the end of the strap through the hole and then pass the strap through the loop and pull tight.

The detachable belt clip fits into the slot located on the rear of the unit. To remove the belt clip, press the locking clip at the top of the belt clip away from the unit and slide the belt clip upwards. To install the belt clip slide it down into the slot and snap in to place.

5