Charging the FR-1538:
Insert the charging transformer into a household electrical outlet and connect its power jack to the socket on the rear of the charging stand. Simply placing the unit into the charging stand will begin the charging process. The red LED on the front of the charging transformer serves as a charge indicator. The charging stand will charge two units simultaneously. Approximately 12 – 16 hours are required to fully charge the batteries. Remember to turn your
CAUTION: The charging stand in your kit is intended for use with the rechargeable NiMH batteries supplied with the unit. Do not attempt to recharge any other type batteries (Alkaline) with the charging stand.
CHARGING | TRANSFORMER | CHARGING |
TRANSFORMER | ||
STAND | CONNECTOR |
|
RED LED
CHARGING
INDICATOR
Controls:
Power On/Off and Enter ( ) Button (9):
Press and hold this button ( ) momentarily to turn the unit on. A short confirming melody will sound and the unit will perform a brief
Enter Button (9):
This button ( ) is also used to confirm options for operating modes during the function edit mode. During main channel selection, a momentary press of this button will access the CTCSS subcode for selection using the Up and Down buttons.
8