Audiovox FR-230 owner manual

-10-

To Transmit

1.Set the desired channel.

2.Press and hold the P (Push-to-Talk) button while speaking slowly and clearly in a normal voice, approximately 2 to 3 inches from the microphone.

3.The transmit indicator will illuminate while transmitting.

4.Release the P (Push-to-Talk) button when you finish speaking to receive incoming signals.

To Receive.

1.Set the desired channel.

2.Adjust the volume control to the desired listening volume by using the up and down buttons while listening to the button conformation tones

3.The transceiver will play strong signals through its internal speaker or through a headset if so equipped.

Monitor Function

The monitor button can be used to play all signals present on a channel. This is useful when communicating with other parties at extreme range.

The monitor function can be locked on by pressing its button for three seconds. When the monitor lock has been activated, the LED display will flash and a conformation tone will be heard. Pressing the monitor button a second time will unlock the monitor function.