FCC WARNINGS
This device complies with part 15 of the FCC rules, operation is subject to the condition that this device does not cause harmful interference.
Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations.
Features
No Air Time Fees and No License Required | Up to 2 miles range |
Auto Battery Saver and Auto Squelch | 14 Channel |
Monitor and Key Lock Button | |
Talk Confirmation Tone and Call / Ring Button | Detachable Belt Clip |
PRECAUTIONS
•Do not modify or attempt to adjust the transceiver for any reason.
•Avoid extremes in exposure to water, heat, and cold. This transceiver is weather resistant but not waterproof.
•Do not expose the transceiver to long periods of direct sunlight, nor place the transceiver close to heating appliances.
•Do not place the transceiver in excessively dusty areas, humid areas, wet areas, nor on unstable surfaces.
•If smoke or something unusual is coming from the transceiver, immediately switch OFF the power and remove the batteries from the transceiver. Contact your dealer.
UNPACKING
Carefully unpack the transceiver. We recommend that you identify the items listed below before discarding the packing material.
• Transceiver | 1 • Belt Clip | 1 • Instruction Manual | 1 |
Controls and Indicators
1.Transmission/Reception indicator
2.PTT button
3.MONITOR button
4.ENTER/LOCK button
5.UP/DOWN buttons
6. | Microphone |
|
| |
7. | POWER button |
|
| |
8. | MENU button | 1 | 1 1 | |
9. | CALL button | |||
2 |
| |||
10. Power Saver mode | 1 0 | |||
| ||||
| indicator | 3 | 9 | |
11. | LED display | 4 | 8 | |
|
| |||
|
|
| ||
5
7
6
Display and Indicators
LED display - indicates Channel numbers, Volume level, Lock, Beep, Low Battery Level, etc.
Transmission and Receiption indicator - When transmitting, the indicator stays on. The indicator flashes when receiving a singal.
Power Saver Mode indicator - flashes in Power Saver Mode.
1
