Audiovox FR14 Battery Installation, To Turn On The Unit or To Turn Off The Unit, To Transmit

Battery Installation

1a

1b

1c

4 “AAA” alkaline batteries

1.(a) Lift the tab of the belt clip while

(b)pushing the clip up to remove it.

(c)Pull lock tab down and lift door up (towards you) to remove battery cover.

2.Insert four “AAA” batteries. Position batteries according to polarity markings. Reverse the steps in “1” to re-assemble.

Note : • Make sure the battery + and - terminals are aligned as shown above.

• When batteries are low or need charging the BATTERY

LOW will blink. Replace all batteries with new alkaline batteries.

2

To Turn On The Unit or To Turn Off The Unit

Press the POWER switch for more than 1 second.

Auto Battery Power Saver

The unit has a special circuit designed to extend battery life. If there are no transmissions within 3 seconds, the unit will automatically switch to battery save mode. The Power Saver Mode LED(Red) will flash.

Low Battery Indicator

When battery level becomes low, appears on the LED display and flashes. Replace all four batteries with new ones.

To Transmit

Simply talk to the built-in microphone and press the PTT(Push- To-Talk) button.

To Adjust VOLUME control

Press momentarily UP button to increase or DOWN button to decrease volume.

The higher number (16), the higher volume level.

To Select Main Channel

1.Press the MENU button. The LED display indicates a flashing number.

2.Press the UP or DOWN button to set a desired channel from 1 to 14.

3.Press the ENTER button.

Monitor

The Monitor function de-squelches the receiver in any situation. Use this function when received signals are too weak to recognize or when you want to adjust the volume while listening to background noise.

3