Channel Scan
This feature allows the transceiver to automatically check all
14channels for activity. Pressthe menu button twice or until
“SCAn”is shown on the display. Pressing the UP or DOWN
buttonswill cause the transceiver to immediately begin scanning
thechannels for activity. Whena signal is received, th e unit will
pauseon that channel for the duration of the signal and an
additional5 seconds. If no other signals are received during
thisperiod, the transceiver will resume scanning. Whilescanning,
SC willbe shown in the upper right of the display. Pressing
anyof the buttons will exit scan mode.
þÿ
13
SC