we do recommend that you not change this setting unless it proves to be necessary in your particular situation.

To access the transmitter power selection function, the selected channel must be either GMRS/FRS (1-7) or GMRS only (15-22). Select the desired power as follows:

-From GMRS/FRS standby mode, press the MODE Button 3 times until the Po HI or Lo indication appears with a flashing HI or LO indica- tion on the display.

NOTE: If the current channel is FRS only (8-14), power will not be selectable.

-Press the Up or Down button to toggle between the High and Low se- lections.

-Press the PTT button momentarily to confirm selection.

VOX Selection Mode

This option enables you to have hands-free conversation. Your voice or nearby sound is detected and the radio transmits without the need to press the PTT button.

To set radio for VOX operation:

-From GMRS/FRS standby mode, press the MODE button 4 times until Uo appears with the VOX icon flashing on the display.

-Press the Up or Down button to select VOX On (if oF appears flash- ing) and the 1-5VOX level sensitivity.

-Momentarily press the PTT button to confirm the VOX selection.

-The VOX icon will appear steady on the LCD display.

A VOX sensitivity of 1 is the most sensitive, and should be used in a rela- tively quiet surrounding. A VOX sensitivity of 5 is the least sensitive and should be used in a noisy surrounding.

VOX can be turned off by selecting oF as the setting.

Dual Watch Mode

This feature allows you to monitor two channels at the same time. While in dual watch mode, the unit will continuously monitor both the primary and dual watch channel. Received signals will be played for 5 seconds, then 17

128-6476

17 of 28

Page 17
Image 17
Audiovox GMRS-3000PK manual VOX Selection Mode, Dual Watch Mode