Recording television programmes
Refer to the control reference on page 14.
Flexible Recording
[HDD] [RAM] [DVD-R]
The unit sets the best possible picture quality that fits the recording within the remaining disc space.
e.g.,
Recording from an external equipment
[HDD] [RAM] [DVD-R]
Preparation
≥Connect a video cassette recorder, etc. to this unit’s input terminals.
≥When recording bilingual programmes [HDD] [RAM]
Recording
Recorded | Remain |
|
|
45 minutes in SP mode
60 minutes
Programme to be recorded
Preparation
Select the channel to record.
Perfectly fit!
Recording rate
between SP and LP
When both M 1 and M 2 is selected on the connected equipment, you can select the audio type in playback.
[DVD-R]
Select either M 1 or M 2 on the connected equipment. (You cannot select the audio type in playback.)
≥When the output signal from the external equipment is NTSC, change the “TV System” to “NTSC” in the SETUP menu
(➡page 41).
≥To reduce noise in input from external equipment, set
≥Press [HDD] or [DVD] to select the recording drive.
e.g., Connecting other video equipment to the AV3 input
terminals |
|
|
This unit | OPEN/CLOSE | REC |
| TIME SLIP | HDD DVD |
|
| TIME SLIPCH |
1While stopped
Press [FUNCTIONS].
2Press [3, 4, 2, 1] to select
“FLEXIBLE REC” and press [ENTER].
FLEXIBLE REC
Recording in FR mode
Maximum rec. time | 3 Hour 00 Min. |
| ||
Set rec. time |
| 3 Hour 00 Min. |
| |
|
|
|
|
|
Start |
|
| Cancel |
|
SELECT |
|
| ||
|
|
| RETURN |
|
3Press [2, 1] to select “Hour” and “Min.” and press [3, 4] to set the
recording time.
≥You cannot record more than 8 hours.
≥You can also set the recording time with the numbered buttons.
4When you want to start recording
Press [3, 4, 2, 1] to select “Start” and press [ENTER].
≥Recording starts.
≥The recording mode becomes FR mode.
To exit the screen without recording
Press [RETURN].
To stop recording partway
Press [∫].
To show the remaining time
Press [STATUS]. | Remaining | ||
REC 59 | |||
| |||
| time | ARD | |
|
| ||
|
| L R | |
|
|
|
RQT7462
VIDEO IN L/MONO - AUDIO IN - R | |
Yellow White Red | |
| Audio/Video cable |
Other video equipment
If the audio output of the other equipment is monaural, connect to L/ MONO.
§The
1While stopped
Press [INPUT SELECT] to select the input channel for the equipment you have connected.
e.g., If you have connected to AV3 input terminals, select “A3”.
2Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
≥Using Flexible Recording (➡left), you can save content of a video cassette to 1 disc with the best possible quality of recording without wasting disc space.
3When recording from other video equipment
Start play on the other equipment.
4Press [¥ REC].
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [∫].
Almost all videos and DVD software on sale have been treated to prevent illegal copying. Any software that has been so treated cannot be recorded using this unit.
16
