NOTE: Pressing the PTT button during dual watch mode will transmit on the primary channel and suspend dual watch operation for 5 seconds. Dual watch mode will then resume.
- Momentarily press the SCAN button to exit the dual watch mode.
Key Tone
This feature allows the transceiver to sound a confirmation tone when- ever the following keys are pressed: Monitor (M) Button, Up/Down But- tons, MODE Button or SCAN Button.
To turn the key tones on or off:
-From GMRS/FRS standby mode, press the MODE Button 6 times (5 times for FRS) until the Bell (
) icon flashes, and on or oF ap-
pears on the display.
-Press the Up or Down Button to toggle the key tone feature On or Off.
-Press the PTT button momentarily to confirm selection.
When the key tone feature is on, the Bell icon appears steady on the display, and the beep tones sound in response to button activation.
Roger Beep Tone
The Roger Beep is a tone which is automatically transmitted whenever the PTT button is released. This tone alerts the receiving party that the transmission has been terminated intentionally.
To enable and disable the Roger Beep tone:
- From GMRS/FRS standby mode, press the MODE Button 7 times (6 times for FRS) until the flashing Roger Beep icon (
) and on or oF appears on the display.
-Press the Up or Down button to select the tone on or off as desired.
-When enabled, the tone icon (
) appears steady on the display.
-Press the PTT button momentarily to confirm selection.
16
128-7521
16 of 28
