Audiovox HD510 operation manual Connecting the Speaker Level High Level Inputs

HD510

Connecting the Speaker Level (High Level) Inputs

For older receivers with no LFE or Subwoofer outputs, run speaker wire from your re- ceiver's front left and right speaker level outputs to the left and right speaker level in- puts on the subwoofer. Connect the front left and right surround speakers in parallel with the subwoofer.

NOTE: To avoid possible output problems, do NOT use the "speakers B" out- put to attach the subwoofer to a receiver.

IMPORTANT: All speakers in a system must be connected with the same po- larity. Polarity is indicated by a color stripe on the insulation, by ridges mold- ed into the insulation, or by the colors of the wire - one copper and one silver. Strip the insulation from the speaker wire ends to reveal the bare conductors before connecting to a speaker, subwoofer or receiver. Always connect the red

(+)terminal on the receiver to the red (+) terminal on the Subwoofer, and con- nect the black (-) terminal on the receiver to the black (-) terminal on the Sub- woofer. The same is true for hooking up the Receiver outputs to the Front speakers: red (+) to red and black (-) to black.

page 7