OPERATION
1.Connect the monitor power input plug (7) to a DC power source (Red plug +12 VDC, Black plug
2.Connect the external video source output signal (from VCP/ DVD, TV Etc.) to the VIDEO IN jack (8).
3.Press power On/Off button (2) to the On position. The LED power indicator will light red.
4.Press the Picture Select button (4) to adjust the picture dis- play characteristics. The adjustments will be shown on the On Screen Display in the following sequence: Contrast, Brightness, Color, and TINT.
5.While in the video adjustment mode, press the up button (5) to increase the selected adjustment level or press the down button (6) to decrease the level.
GENERAL INSTALLATION INFORMATION
1.Installation will vary from vehicle to vehicle, as headrests in vehicles are not standard.
2.This unit is intended for installation by professional installers.
3.The kit consists of the screen assembly, a mounting housing, key to remove screen from housing, wiring harness and remote control unit.
4.To release screen from housing, slide the key on either the right or left side of the screen between the housing and screen assembly to release the two clips which hold the screen assembly in the housing.
5.To install the screen assembly into the housing simply insert the screen assembly until you hear the clips click into
the locking position.
6
