6.Headrests will have to be cut to install the screen assembly housing.
Caution - Do not
7.To fasten the housing to the headrest, use either screws or tie wraps. Find a suitable mounting surface in the headrest to secure the housing.
Caution - Use the proper length screws, which will vary with each headrest. If a suitable mounting surface cannot be found, use tie wraps to secure the housing.
8.Attach the wiring to the screen, through the housing into and down the headrest and seat before permanently mounting the housing and screen assembly.
9.Follow the wiring diagram in the owner’s manual for proper wiring connections.
NOTE: A Remote Control Unit is included which will perform the Functions and adjustments of Operation items 3, 4, and 5 as well as additional features as noted below.
REMOTE CONTROL FUNCTIONS:
LCD/VCP: | Power button for LCD/VCP |
REPLAY: | Press to rewind tape and automatically go to |
| play mode. |
PICTURE SEL: .On Screen Display (OSD) for color, tint,brightness, contrast. Use ± to adjust
REW: | Rewinds tape |
FWD: | Fast Forward tape |
PLAY: | Plays tape |
STOP: | Stops tape |
| 7 |
