Audiovox P-942 manual Operating Instructions

OPERATING INSTRUCTIONS

30	11, 20, 21	28, 29	19	14, 15		27	12		9	26
2										18
	RELEASE￿
								T/F￿	MUTE￿ LOC￿
						CLAS
						POP
	SEL￿	LOUD￿	MP3 ST PTY ME/CR EON LOC		TAPE IN	ROCK
		BAND￿
			SW LOUD AF TA TP MONO REC		CDP				AS/PS￿	EQ￿
3
										17
4		1￿	2￿	3￿	4￿	5￿	6￿	MODE￿ POWER￿
5
6
7		25	22	23	24
	8, 10			13					16	1

1POWER OFF BUTTON

Press this button to turn the unit on and off. The unit will also turn on automatically when a disc is loaded, or when any other button is pressed.

VOLUME / LEVEL CONTROLS

To increase the volume level, press the + side of the button. The vol- ume will increase and the level will be shown on the display panel from a minimum of VOL 00 to a maximum of VOL 100. To increase the volume quickly, keep the button pressed. To decrease the vol- ume level, press the - button. Keep the button pressed to decrease the volume quickly. The display will automatically return to the normal indi- cation 5 seconds after the last volume adjustment or when another func- tion is activated. These controls are also used in conjunction with the Select button 3 to adjust the volume, bass, treble, balance and fader levels as described in 4, 5, 6, and 7.

3SELECT BUTTON (SEL)

This button is used to select the audio function (volume, bass, treble, balance or fade) to be adjusted using the Volume/Level Control 2. Press- ing the SEL button once will set the unit for volume adjustment (VOL will appear on the display panel). Pressing the button additional times will select bass adjustment (BAS on display panel), treble adjustment (TRE), balance (BAL), fader (FAD), and volume (VOL) again. The display will return to the normal indication 5 seconds after the last ad- justment or when another function is activated.

4BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing the SEL button until the BAS indication appears on the display

-2-

128-6287A

2 of 12