SECO-LARM USA E-941SA-600PQ Table of Contents, Introduction, Features, Parts List, Specifications

SECO-LARMELECTROMAGNETIC LOCK

Table of Contents:

Introduction	2	Installation	4-6
Features	2	Wiring Diagram	7
Parts List	2	Maximum Wiring Distance	7
Specifications	2	Troubleshooting	8
Overview and Installation Applications	3	Warranty	8

Introduction:

The E-941SA series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism.

Features:

∙Anodized aluminum.

∙No residual magnetism.

∙MOV surge protection.

∙Adjustable mounting bracket.

∙Complete mounting hardware for typical installations.

∙“L” bracket and “Z” brackets available for easy mounting. *

∙12/24VDC selectable.*

∙Detachable faceplate.*

E-941SA-1K2PQ and E-941SA-600PQ also feature:

∙Built-in dual-colored status LED and bond sensor to show locking status:

Green	Door is closed and locked
Red	Door not closed and/or locked
Off	Door in use / No power

E-941SA-300 features:

∙Weatherproof for outdoor use.

∙Pre-installed 36” (91cm) hookup wire included.

*E-941SA-300 does not have this feature.

Parts List:

1 x Mounting plate

1 x Electromagnet

1 x Armature plate

1 x Armature screw

2 x Steel washers

1 x Rubber washer

1 x Door spacer

1 x Sexnut bolt

2 x Guide pins

4x Long self-tapping screws

2x Short self-tapping screws

2x Hex-head mounting screws

2x Tamper caps

2x Allen wrenches

Specifications:

		300-lb	600-lb		1,200-lb
Operating voltage		12VDC ±10%		12 or 24 VDC ±10%
Current draw	12VDC	315mA@			500mA
	24VDC	N/A			250mA
Coil resistance		48Ω ±10% per		coil (see page 8)
Bond sensor relay			3A@12VDC
	Magnet	63/4” x 1” x 11/4”	97/8” x 11/16” x 15/8”		101/2” x 15/8” x 25/8”
		(170 x 23 x 32 mm)	(250 x 26 x 40 mm)		(268 x 42 x 67 mm)
Dimensions
	Armature plate	6” x 3/8” x 11/4”	71/4” x 1/2” x 11/2”		71/4” x 5/8” x 23/8”
		(152 x 10 x 32 mm)	(185 x 12 x 38 mm)		(185 x 16 x 61 mm)
Operating temperature		14°~131° F (-10°~55° C)
Weight	600-lb	2-lb 13.5-oz (1.3kg)	4-lb 6-oz (2kg)		11-lb (5kg)
UL Listed		No	Yes		Yes

2 SECO-LARM U.S.A., Inc.