Audiovox P-956G Cr Track Scan SCN, Cs Disc Select UP/DOWN CD-/CD+, Ct Disc Eject, DnRESET Button

Shuffle Play mode, pressing the Forward Track Select (		) or
Backward Track Select (	) will also select tracks in a random

order instead of the normal progression. Additional presses will select tracks in random order. The Shuffle Play mode can be cancelled by pressing the button again (S--SHF) indication will disappear from the display panel) or by activating the Repeat Play cp or Track Scan cr functions.

cr TRACK SCAN (SCN)

During disc play, press this button to play the first 10 seconds of each track on the disc (S--SCNwill appear on the display panel with the track number). When a desired track is reached, press the Scan button again to cancel the function and play of the selected track will continue. Track Scan mode will also be cancelled by activating the Repeat Play cp or Shuffle Play cq functions.

cs DISC SELECT UP/DOWN (CD-/CD+)

These buttons are used to select the desired disc for play during changer operation. To advance to a higher number disc, press the CD+ button, and to return to a lower number disc, press the CD- button. The number of the disc in play will be shown on the display panel.

ct DISC EJECT ( )

When this button is pressed, disc play is stopped, the disc is ejected

and the unit will change to radio operation. If the disc is not	removed
from the unit within 15 seconds, the disc will be reloaded (	will
reappear).
cuMODE SELECTOR (MODE)

is loaded in the unit), press the button again. During disc play, press this button to change to radio operation without ejecting the disc. On the P-956G radio, pressing and holding this button (ILL/MODE) for 2 seconds will change the LCD backlighting (Illumination) between Green and Amber.

dl TIME/FREQUENCY SELECTOR (T/F)

Pressing the Time/Frequency (T/F) button will display the time of day for 5 seconds, after which the display will automatically return to the radio, CD Player or CD changer display, depending on which mode was currently active. To set the correct time of day, refer to the procedure for Setting the Clock.

dmTHEFT-DETERRENT LED

Located on the chassis behind the front panel, a light-emitting diode (LED) will flash when the panel is removed. The flashing light serves as a visual warning to the would-be thief that the unit has been disabled by removal of the front panel.

dnRESET BUTTON

A RESET button is located on the front of the chassis (front panel must be removed to access the button). The re-set circuitry is provided to protect the microprocessor circuitry and should only be activated under the following circumstances as it will erase the time and pre-set memories.

1.Upon initial installation after all wiring is completed.

2.If there is a malfunction of any of the switches on the unit, pressing the RESET button may clear the system and return to normal operation.

During radio play, press the MODE button to select operation of the CD Player or the optional CD changer. Refer to the CD Changer Controls section for specific operating instructions.

If the button is pressed when no CD changer is connected to the unit, no changer indications will appear on the display panel. The unit will then return to radio operation. To return to CD Player operation (if a disc

do FRONT PANEL RELEASE BUTTON

This button is used to release the mechanism that holds the front panel to the chassis. To detach the front panel, press the button so that the left side of the panel is released. Grasp the released side and pull it off of the chassis. To re-attach the panel, position the right side of the panel in place first and then press the left side of the panel until the mechanism locks it into place.

-7-

128-6838

7 of 16