Audiovox P-99 4TREBLE CONTROL, 5BASS CONTROL, 6LEFT/RIGHT BALANCE CONTROL, 8LOUDNESS CONTOUR LOUD

momentary press function is activated and two beep tones whenever a press-and-hold function is activated (i.e. Auto-Store Tuning, etc.). To deactivate this feature, press the button again

for longer than 2 seconds ( the indication will disappear from the display panel).

4TREBLE CONTROL

To adjust the treble level, first select the Treble mode by pressing the Select button 3so that the “TRE” indication appears on the display panel. Within 5 seconds of choosing the Treble mode, turn the Level Control 2clockwise to increase or counter-clockwise to decrease the treble response as desired. The treble level will be shown on the display panel from a minimum of -7 to a maximum of +7 (0 is flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

5BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing the Select button 3so that the “BAS” indication appears on the display panel. Within 5 seconds of choosing the Bass mode, turn the Level Control 2clockwise to increase or counter-clockwise to decrease the bass response as desired. The bass level will be shown on the display panel from a minimum of -7 to a maximum of +7 (0 is flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

6LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance mode by pressing the Select button 3so that the “BAL” indication appears on the display panel. Within 5 seconds of choosing the

-2-

Balance mode, turn the Level Control 2 clockwise or counter-clockwise to adjust the balance as desired. The balance position will be shown on the display panel from “BAL.L 15” (full left) through “BAL.R 15” (full right). When the volume level between the left and right speakers is equal, “BAL 0” will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

7FRONT/REAR FADER CONTROL

To adjust the front-rear speaker balance, first select the Fader mode by pressing the Select button 3so that the “FAD” indication appears on the display panel. Within 5 seconds of choosing the Fader mode, turn the Level Control 2 clockwise or counter- clockwise to adjust the front-rear speaker balance as desired. The fader position will be shown on the display panel from “FAD.R 15” (full rear) through “FAD.F 15” (full front). When the level between the front and rear speakers is equal, “FAD 0” will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

8LOUDNESS CONTOUR (LOUD)

When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Press the button to activate this feature and the indication “LOUD” will appear on the display panel. Pressing the button again will deactivate the feature (the “LOUD” indication will disappear from the display panel).

9AUDIO SETTING MEMORIES (P1/P2/P3)

Three pre-set buttons are provided on this unit to store desired