ERROR SIGNS
If a problem should develop while operating the CD changer, the following error signs may be displayed on the LCD panel:
E - 01 : Indicates abnormal disc change function. Contact the place of purchase for further service advise.
E - 30 : Indicates excessive temperature conditions. The error sign will go off and play will resume when the changer temperature returns to normal range.
-- -
0 - 0 0 : No discs are loaded in the magazine.
1 - -
TROUBLESHOOTING
An error made in operation or during installation of this product may be mistaken for a system malfunction. Please perform the checks described below before contacting your dealer or service facility.
Symptom | Possible Cause | Remedy | |
No power | Blown fuse | Check fuses in vehicle fuse box and changer system. | |
|
| Replace as necessary with fuse of same type and rating as | |
|
| original. If fuse blows again, consult with service facility. | |
|
|
| |
| Incorrect connection | Check all wiring and correct as necessary. | |
|
|
| |
Magazine cannot be | Magazine is inserted in wrong | Insert magazine in proper direction. | |
installed | direction |
| |
CD is not played | Disc is loaded incorrectly in magazine | Load disc correctly in the magazine. | |
|
|
| |
Noise, skipping, or | Scratches on disc or warped disc | Check sound on another disc. If sound from second disc is | |
intermittent sound |
| OK, first disc is defective. | |
during playback. |
|
| |
Extremely dirty disc | Clean disc | ||
| |||
|
|
| |
| Mounting angle adjustment on the CD | Set the mounting angle adjustment to the correct position as | |
| changer is not correct | per the installation instructions of the CD changer. | |
|
|
|
4