Audiovox P-MC3 owner manual Wired Commander Operation, 9 8 7 bl

WIRED COMMANDER OPERATION

1 9 8 7 bl

l

4 56 3 2

1LCD DISPLAY

The LCD Display Panel will illuminate when the CD changer is operating. Different symbols will appear depending on the function and operation in use. Each display is explained in the applicable function explanation below.

2PLAY / PAUSE ( / )

Pressing this button turns on the CD changer, illuminates the LCD panel and begins play of disc #1 if a new CD magazine has been loaded into the changer. If a magazine was already in the changer, play will resume from the track on the disc previously in play. Play

of the disc is shown by the indication and the rotating disc symbol on the LCD panel. Pressing the button again will tempo- rarily stop play of the disc. The pause indication will be shown on the LCD panel and the disc symbol will stop rotating and flash instead. Press the button again to resume play of the disc.

NOTE: If left in the PAUSE mode for 5 minutes, the unit will automatically shut off.

3POWER OFF SWITCH (OFF)

Press this switch to turn the CD changer off and return to normal FM reception.

4DISC SELECT ( - + )

The Disc Select function is used to select the desired disc for play as shown on the LCD panel. The unit will automatically load the selected disc and begin play. To advance to a higher number disc, press the + side of the button. To return to a lower number, press the - side.

5TRACK SELECT ( )

The Track Select function is used to quickly access the beginning of a particular track. Press Forward Track Select () or Backward Track Select ( ) to locate the desired track as shown by the track number indication on the LCD panel.

6TRACK SEARCH ( )

High-speed audible search to any section of the disc can be made by the search functions. Press and hold the button to advance

quickly in the forward direction or press and hold the button to advance rapidly in the backward direction. During search operation, the rotating disc symbol will turn faster and the appro- priate symbol ( ) or ( ) will flash on the LCD panel. When the forward search ( ) button is held down and the end of the

last track is reached, or the backward search ( ) is held down and the unit reaches the beginning of the first track on the disc, the unit will enter the Pause mode until the button is released.

7TRACK / DISC SHUFFLE (SFL)

When the Shuffle button is pressed, the SHUF indication will appear on the LCD panel and the tracks on the disc will be played

2