Audiovox P945WESP Bp Liquid Crystal Display Panel FUNCTIONSbr, Track Select, Bq Disc Slot

station is now set into that preset memory position. The station can now be recalled at any time by pressing that button.

4.Repeat the above procedure for the remaining pre-sets on that band and for the other 3 bands on the unit.

CAUTION: This unit is designed for play of standard 5" (12cm) Compact Discs ONLY. Do not attempt to use 3" (8cm) CD-Singles in this unit, either with or without an adap- tor, as damage to the player and/or disc can occur. Such damage will not be covered by the Warranty on this product.

bp LIQUID CRYSTAL DISPLAY PANEL FUNCTIONSbr

TRACK SELECT

The Liquid Crystal Display (LCD) panel displays the frequency, time, and all activated functions, including five bar graphs which provide a visual representation of the audio signal.

NOTE: It is a characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they may take longer to illuminate than under normal conditions. In addi- tion, the visibility of the numbers on the LCD may slightly decrease. The LCD readout will return to normal when the temperature increases to a normal range.

bq DISC SLOT

With the label surface facing up, gently insert the disc into the slot until the soft-loading mechanism engages and disc play begins. A dual disc indication appears, with the upper disc

These buttons are used to quickly select the beginning of a par- ticular track. With each momentary tap of the Forward Track Select button (+ ), the next higher track number will be selected. Simi- larly, with each momentary tap of the Backward Track Select but- ton ( - ), the next lower track number will be selected.

bs CUE/REVIEW FUNCTIONS

High-speed audible search to any section of the disc can be made by the Cue and Review functions. Press and hold the Cue but- ton (+) to advance rapidly in the forward direction or the Re- view button (-) to advance rapidly in the backward direction. During either function, the elapsed time within each track will auto- matically be shown on the display panel.

() indicating a disc is installed; the lower disc indication () illuminates and becomes animated, the S--CDPsymbol lights, and the track number and elapsed time will appear on the display panel.

-6-

bt PAUSE (PAU) BUTTON

Pressing this button during CD play will pause disc operation; S--PAUSEwill be displayed and disc play will stop. Press the button again and disc play will resume from the point at which it was paused.

128-6862A

6 of 16