Audiovox P945WESP Audio Mute Mute, Bl AM/FM Band Selector Band, Bo Station PRE-SET Memories

9 AUDIO MUTE (MUTE)	AM band. The unit will stop at each preset station for 5 seconds
	before continuing to the next pre-set station. During this time,
This button is used to mute the volume from the system. By	the preset station number (1-6) in the band will flash. Press the
pressing the button, a flashing MUTE indication will appear on	button again momentarily to stop Pre-Set Scan operation and
the display panel and the volume will be muted. Pressing the	remain on the selected frequency. The preset station number (1-
MUTE button again, or any other panel button, will return the	6) stops flashing.
volume level to the setting in use before the Mute function was	Pressing the button for longer than 2 seconds will activate the
activated.
	Auto-Store Tuning feature which will automatically scan each FM
bl AM/FM BAND SELECTOR (BAND)
	band (or the AM band, if in use) and enter up to 6 strong stations
	into the 6 preset memories of each band. After entering the
During radio operation, each momentary press of the BAND/LOUD	stations into the memories, the unit will automatically stop at
button will change the radio band. The indication AM, F1, F2, or	each station for 5 seconds so each can be heard. If you have
F3 will appear on the display panel according to your selection.	already set the pre-set memories to your favorite stations, acti-
	vating the Auto-Store feature will erase those stations and enter
bm MANUAL/AUTOMATIC UP/DOWN TUNING (+ / -)	the new strong stations. This feature is most useful when travel-
	ling in a new area where you are not familiar with the local sta-
The radio tuning function is normally in automatic tuning mode.	tions. Momentarily press the button again to stop Auto-Store
	operation and remain at the current station.
The radio will tune to the next available station and stop at that
frequency when either button is pressed momentarily.	bo STATION PRE-SET MEMORIES
To tune rapidly in an upward or downward direction, press and
hold either button for at least 2 seconds. MANUAL will appear on	To set any of the 6 pre-set memories in each band, use the fol-
the display and the radio will tune through the entire band in an
	lowing procedure:
up or down direction while the button is pressed. When the de-
	1. Turn the radio on and select the desired band.
sired radio frequency is reached, release the button; 5 seconds
later, AUTO will appear momentarily on the display.	2. Select the first station to be pre-set using the Manual/Auto
	matic Tuning Controls bm.

bn AUTO-STORE TUNING (AS) PRE-SET SCAN TUNING (PS)	3. Press the pre-set button (1-6) to be set and continue to
	hold it in. After approximately 2 seconds the preset num-
During radio operation, press this button momentarily to scan
	ber will appear on the display panel, indicating that the
the 6 stations pre-set into the memories of each FM band or the
-5-

128-6862A

5 of 16