BUTTON & OPERATION OF AV SYSTEM
Each mode's level adjustment is controlled by the CTRL up & down buttons.
Press the 
CTRL button to decrease the level of the selected mode. 
Press the CTRL 
button to increase the level of the selected mode.
If there is no button press within 5 sec or the DISP button is pressed, mode switched back to the previous mode.
1. Adjust Brightness
Select Brightness mode by pressing the Menu 
/
until "BRIGHT" is displayed.
Press the CTRL 
/
button to adjust Brightness level.
Movement of the indicator level to the left will decrease the Brightness and to the right will increase it.
2. Adjust Dimmer
Dimmer is to control the brightness of illumination in TFT LCD.
Select Dimmer mode by pressing the Menu 
/
, until "DIMMER" is displayed.
Press the CTRL 
/
button to adjust Dimmer level.
Movement of the indicator level to the left will decrease the Brightness of the LCD and to the right will increase it.
3. Adjust Color
Select Color mode by pressing the menu 
/
until "COLOR" is displayed.
Press the CTRL 
/
button to adjust the Color level.
Movement of the indicator level to the left will decrease the intensity of the color and to the right will increase it.
4. Adjust Tint (NTSC Only)
Select Color mode by pressing the Menu 
/
until "TINT" is displayed.
Press, the CTRL 
/
button to adjust the Tint level.
Movement of the indicator level to the left will emphasize green color and to the right will emphasize red color.
If no button is pressed within 5 seconds or the
DISP button is pressed, the mode will be switched back to the previous mode.
BUTTON & OPERATION OF AV SYSTEM
Closing the Monitor When the Power is On
1. Close the monitor
To close the monitor when the power is on, press the Close button on the main unit or press the power button and the screen will retract into the unit.
2. Open the monitor |
|
|
|
|
|
|
|
|
| ||
Press the Power button and the unit will turn |
|
|
|
|
|
|
| ||||
on and the screen will slide out and up. |
|
|
|
|
|
|
| ||||
To open the monitor from the main unit, |
|
|
|
|
|
|
| ||||
press the Open button or | / | button. The |
|
|
|
|
|
|
| ||
monitor will slide out and open to the |
|
|
|
|
|
|
| ||||
memorized angle. |
|
|
|
|
|
|
|
|
| ||
If monitor is physically prevented from sliding |
|
|
|
|
|
| |||||
out for longer than 2 sec, the monitor will |
|
|
|
|
|
|
| ||||
slide back in automatically. Remove the |
|
|
|
|
|
|
| ||||
obstacle and repress the Open button or the |
|
|
|
|
|
|
| ||||
/ | button again. |
|
|
|
|
|
|
|
|
| |
If monitor is physically prevented from |
|
|
|
|
|
|
| ||||
opening for longer than 2 sec, the monitor |
|
|
|
|
|
|
| ||||
will stop opening and stay at that angle. |
|
|
|
|
|
|
| ||||
Remove the obstacle and press the Open button or the | / | buttons again to open the | |||||||||
monitor to the memorized angle. Or, press the Close button to close monitor and slide into | |||||||||||
the main unit. |
|
|
|
|
|
|
|
|
| ||
3. Memorizing the Monitor Angle |
|
|
|
|
|
|
| ||||
Press the Open button momentarily or the | / | button to adjust |
| MODE |
| ||||||
the monitor backward one step as a time. |
|
|
|
|
|
| |||||
|
|
|
|
|
|
| |||||
After adjusting monitor angle, press and hold the Open button or |
| MENU |
| ||||||||
the | / button longer than 2 sec to memorized the current |
|
| PWR | |||||||
CONTROL | MODE | CONTROL | |||||||||
monitor angle. |
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| |||
Once the monitor angle is memorized, the monitor will always |
| MENU |
| ||||||||
open to the memorized angle. |
|
|
|
|
|
|
|
| |||
To clear the memorized angle; When the monitor is closed (Power |
|
| NAVI | ||||||||
On condition), keep pressing the Open button or the | / | button |
|
|
| ||||||
on Remote controller longer than 2 sec will extend the screen to 75 |
|
|
| ||||||||
degrees. |
|
|
|
|
|
|
|
|
| ||
