PCR2500
CARE AND MAINTENANCE/SPECIFICATIONS
The radio portion of your new sound system does not require any maintenance. We recommend you keep this manual to reference instructions regarding the many features of this unit. As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep it in good working condition. The following simple care and maintenance suggestions should be followed to prevent malfunctions of the cassette system.
•Purchase a cassette cleaning kit from your local retail store and use it! After every 20 to 30 hours of operation you should clean the cassette mechanism to maintain optimum sound.
•Do not use cassettes that exceed 45 minutes of play on each side.
•Do not insert a cassette that appears to be broken, twisted, dirty or has loose or torn labels on it.
•Always keep your cassettes away from direct sunlight or exposure to
•Do not keep a cassette in the player when not in use.
•Before inserting a cassette in the player, check that the tape is tightly wound on the reels. Take up any excess slack using a pencil to turn the drive hub in the cassette.
Technical Specifications | General |
| Power Supply: 11 to 16VDC, negative ground |
| Fuses: Ignition/Accessory - 3 amp, AGC |
| Dimensions: 7" X 7" X 2" (178mm x 178mm x |
| 51mm) |
| Specifications subject to change without |
| notice. |
CEA Power Ratings
Power Output: 3 watts RMS X 2 channels into
Signal to Noise Ratio: 60dBA below reference.
(Reference: 1 watt,
Frequency Response: 20Hz to 20kHz,
Reference Supply Voltage: 14.4VDC
FM Tuner
Tuning Range: 87.5MHz - 107.9MHz
Mono Sensitivity: 18dBf
50dB Stereo Quieting Sensitivity: 20dBf
Stereo Separation @ 1kHz: >30dB
Frequency Response: 30Hz to 12kHz,
AM Tuner
Tuning Range: 530kHz - 1710kHz
Sensitivity @ 20dB Signal to Noise: 30uV
Frequency Response: 30Hz - 2kHz,
7
