Audiovox SIR-CK3 manual Using Other Manufacturer’s Mounts

NOTE: Allow a 72-hour period for the adhesive backing to cure completely.

3.Installing the Cradle Using Double-Sided Tape You can mount the cradle directly to your dashboard or other flat surface without using the cradle mount in the kit. To do this, do not remove the mounting plate assembly from the cradle.

a.Remove the 3/4” x 3” double-sided tape from the supplied kit.

b.Determine the location of the cradle, and clean the mounting surface as before.

c.Peel the backing from one side of the tape, and press the tape in place on the rear or bottom cradle mounting plate.

d.Peel the backing from the exposed side of the tape and carefully position the cradle on the mounting surface, gently pressing the cradle into place.

4.Using Other Manufacturer’s Mounts

The Shuttle Cradle can also be installed using other manufacturer’s mounts; the mounting plate provisions on the rear or bottom of the cradle provide you with multiple mounting options within the vehicle using various vehicle-specific aftermarket brackets, such as those purchased separately from Panavise, Pro-Fit, etc.

5.Installing the Shuttle into the Cradle Install the shuttle as follows:

a.Carefully line up the shuttle rear spine grooves with the cradle guide spines; slide the latch tab

lever to the unlock ( ) position, and lower the shuttle into the cradle.

-11-

128-7194

11 of 20