1.Press the MENU button to access the User Menu.
2.Rotate the Encoder knob to select the “Lock Options”.
3.Press the Encoder knob.
4.Rotate the Encoder knob to highlight “Edit Code”.
5.Press the Encoder knob.
6.Enter the default code “0000”.
7.The “New Code” prompt will appear. Enter your newfour digit code using the
8.The lock code is now changed.
Edit Code
Upon entering this mode, the user is prompted to enter the current four digit numerical code being used to lock/unlock channel access. Once the correct code has been entered, the user is prompted to enter the new
Audio Level Options
Upon entering this mode, a 10 segment horizontal bar graph is displayed with a
To select and exit this function, press the Encoder knob. No button activity for 10 seconds will also exit this func- tion.
Antenna Aiming (Home Installation)
Upon entering this mode, two 10 segment horizontal bar graphs are displayed with a
NOTE: Terrestrial repeaters are typically used in large urban areas where structures may affect the line of sight satellite signal. Terrestrial signals (TER) may not be available in your geographic location.
128-7193A
21 of 32