SPECIAL FUNCTIONS USING THE SHIFT BUTTON
There are a number of user preference functions that can be adjusted simply by using the Shift (SFT) button with a specific number code. These functions are explained in the following paragraphs.
DIRECT FM FREQUENCY SELECTION
The selection of a specific FM frequency can be directly accessed us- ing the appropriate code; these codes are presented as follows:
In general, a shift/code is entered in the following manner:
SFT 0 9 SFT , where:
(SFT) represents Shift button activation and XX represents the specific function code. (The
4. Repeat the procedure in steps 2 and 3 to save nine other desirable |
CODE | SELECTION |
|
|
21 | 88.1MHz |
|
|
22 | 88.3MHz |
|
|
23 | 88.5MHz |
|
|
24 | 88.7MHz |
|
|
CODE | SELECTION |
|
|
25 | 88.9MHz |
|
|
26 | 89.1MHz |
|
|
27 | 89.3MHz |
|
|
channels for quick access. |
Figure 11. Modulator Frequency Codes
NOTE: The default frequency is 88.5MHz
|
| 1 | 2 | 3 |
| The Joint | 4 | 5 | 6 |
|
|
|
| |
| Khrisp | 7 | 8 | 9 |
Oh Baby Oh Baby |
|
|
| |
| ||||
CH 101 | World | 6 | 0 |
|
AUDIO OX |
| SFT |
|
PRESS AND HOLD ANY NUMBER BUTTON
SYSTEM DEFAULT SHIFT CODE
Defaults refer to the settings that are entered at the factory. When code 31 is entered, the system is reset to the following defaults:
1. | All channel presets cancel and revert to channel 184. |
2. | The LCD backlighting reverts to Green |
3. | Button confirmation tone is turned on. |
SELECT THE | THE PRESET MEMORY | |
LOCATION APPEARS | ||
DESIRED CHANNEL | ||
HERE | ||
|
4. All channels that were previously Locked Out or Skipped are reinstated |
Figure 10. Setting Preset Channels
8
LCD CONTRAST SHIFT CODE
To change the LCD contrast:
1.Enter code 35.
2.Use the Up and Down directional buttons to increase or decrease display contrast, respectively.
3.Press the SFT button to exit LCD contrast mode.
128-6374
8 of 12