Audiovox NAV101, SU-101

USE OF CONTROLS

1 1

1 ON LED INDICATOR

This indicator lights green when the system is powered up

and operating normally.

2 2

2 FAIL LED INDICATOR

This indicator lights red when a system failure occurs

activating the overvoltage protection circuit.

3 3

3 PHASE SELECT SWITCH

This slide switch is used to change the phase of the

reproduced sound output from the SU-101 Speakers to

match the phase of the audio receiver system.

4 RCA INPUT - R CONNECTOR

This connector accepts the right channel low level output

RCA connector (LINE OUT) from the vehicle radio receiver.

5 5

5 RCA INPUT - L CONNECTOR

This connector accepts the left channel low level output

RCA connector (LINE OUT) from the vehicle radio receiver.

6 HIGH LEVEL INPUT/OUTPUT CONNECTOR

This 10-pin connector provides audio (speaker) connec-

tions between the sub-woofer enclosure, the satellite tweet-

ers and existing audio receiver system.

7 7

7 FUSE - 15A

This fuse provides surge/overvoltage protection for the

SU-101 speaker system.

12 34 5 6

1011

8 B+ TERMINAL

Connect +12 Vdc vehicle power to this terminal using the

Yellow wire supplied (4 meters long).

GND TERMINAL

Connect this terminal to vehicle chassis ground using the

Black wire supplied (1.3 meters long).

blbl

bl REMOTE (REM) TERMINAL

Connect the remote output from the car audio system to

this terminal using the Blue wire supplied (3 meters

long).

bm bm

bm L/R LEVEL CONTROL

This control varies the audio output level to the

satellite tweeters between MIN and MAX.

bn bn

bn SWF FREQ CONTROL

This control adjusts the sub-woofer low-pass-filter

cutoff frequency between 36 Hz and 220 Hz.

bn bn

bn SWF LEVEL CONTROL

This control varies the audio output level to the sub-

woofer enclosure between MIN and MAX.