Audiovox owner manual Connecting the TV55 to a TV

TV55

Connecting the TV55 to a TV

1.Run the RG6 coaxial cable from the antenna towards your television set and connect the RG6 coaxial cable to the supplied Power Injector on the terminal labeled “TO ANTENNA”.

2.Connect the “TO TV” lead on the power injector to the “ANT IN” on your TV.

3.Plug the Power Adapter from the Power Injector into a standard AC outlet. Switch the Power Injector “ON” for amplification. See Fig 14.

Fig 14. TO TV

Splitting the Signal to Multiple TV’s

Follow the diagram to use the TV55 with more than one TV. A splitter will be required sold separately).

	NOTE: The Power Injector
	MUST be installed between
14	the TV55 and the splitter.
	Failure to do so could cause
	a short circuit. The Power
	Injector should always be
	located indoors.

TO TV55

SplitterBSP-2(such as the Terk BSP-2)

TO TV 1 TO TV 2