15
Running Cable
Under a Window:
1. Connect one end of the supplied RG6 coaxial cable to the “F”-
connector output on the end of the TV55 and connect the other
end to the 9 3/4" white flat cable.
Note: If the supplied RG6 Coaxial Cable is not long enough, you
can purchase additional lengths of RG6 Coaxial Cable from the
retailer you purchased the TV55 antenna from.
2. Run the white flat cable through an open window. Make sure
that it runs under the window to ensure proper window closure
See Fig 15.
Run a coaxial cable (not supplied) from the inside end of the 93/4”
white flat cable towards your television set and connect the
coaxial cable to the supplied Power Injector on the terminal
labeled “TO ANTENNA”.
Through a Wall:
If you do not use the supplied 9 3/4" white flat cable to run your
coaxial cable through a window and instead choose to drill
through an external wall, be careful to avoid contact with any
power lines, telephone lines, cable TV lines or plumbing.
1. Connect one end of the supplied RG6 coaxial cable to the “F”-
connector output on the end of the TV55.
Note: If the supplied RG6 Coaxial Cable is not long enough you
can purchase additional lengths of RG6 Coaxial Cable from the
retailer you purchased the antenna from.
2. Drill a hole in an exterior wall matching the diameter of the
RG6 coaxial cable
3. Run the RG6 Coaxial Cable through the hole into the home.
Note: Please see “Water Damage Prevention” for proper sealing
of the hole.
TV55
Fig 15.