signals, power (12 Volt DC ) and Infrared control signals are routed through the DIN
cable to the Monitor. Since the Monitor is deriving power from the VBP3000/
VBP4000, there is no need for a power source to be connected to DC 12V IN jack
located on the Monitor.
NOTE: If connecting the Monitor to the VBP4000 be certain to slide the TV/VCP
select switch located on the face of the Monitor to the VCP position.
H. Using External Audio/Video Sources (Refer to Figure 8)
Connect the VBPEX5 to an external power source. Refer to Figure 4 and Figure
5. Plug the external source audio/video signals into the appropriate jacks on the
side of the Monitor. Plug the video output from an auxiliary source such as
Camcorder, Video Game, DVD Player, Video Cassette Player etc. into the yellow
Video In jack. Plug the left audio signal into the white jack. Plug the right
audio signal into the red jack.
Figure 8
I. Using Headphones (Refer to Figure 8)
Optional wired headphones may be used with the Monitor. Simply plug in the headset
to the headphone jack on the side of the Monitor and both internal speakers will be
turned off.
J. Operation (Refer to Figure 3)
1.Slide the POWER ON/OFF switch to the on position to turn the
Monitor on. The POWER LED will light.
2.When connecting the VBPEX5 Monitor to the VBP3000, slide the TV/
VCP switch to the appropriate position for selecting the TV or VCP
mode.
7