REMOTE CONTROL FUNCTIONS

1. POWER ON/OFF

Press this button to turn on the TV. The channel number or current video source will be displayed on screen, and the picture will appear in a few seconds. Press the button again to turn the TV off.

2.NUMERICAL BUTTONS

Use these buttons to make a direct channel selection. The channel number chosen will be displayed on the screen for 4 seconds. Channel selection is carried out with 0-9 keys (0-99ch) and “1—“ key when in cable mode (100-125ch).

3.CHANNEL UP/DOWN BUTTONS

Use these buttons to advance to the next higher or lower channel.

4.VOLUME UP/DOWN BUTTONS

Use these buttons to raise or lower the sound level. They are also used to make picture adjustments in picture selector mode.

5.PICTURE SELECT BUTTON

Each time this button is pressed, the on screen picture adjustment display cycles through “adjustment bars” for CONTRAST, BRIGHTNESS, COLOR and TINT. Once the desired adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is depressed.

6.MUTE BUTTON

Press this button to cut off all sound. The screen will display the volume adjustment bar for 6 seconds, indicating that the sound has been turned off. Pressing the button again restores sound to the previously set level. The mute feature may also be released by pressing the VOLUME UP/

DOWN BUTTONS.

7.AUTO MEMORY BUTTON

When the AUTO MEMORY button is depressed, all channels in TV or CATV mode are searched and tuned and all the channels with signals detected are automatically stored.

8.SKIP/SEARCH BUTTON

This button selects between SKIP and SEARCH mode. In “SKIP mode” the TV only stops on channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When SKIP mode is off, the TV is in search mode and will stop on all active channels.

9.ERASE/WRITE BUTTON

When tuned to a channel, press this button to store or erase the channel from memory. The stored channel numbers are displayed in “GREEN” on the screen, and the non-stored channel numbers are in “RED”. When using the CHANNEL UP/DOWN buttons, with the skip mode on, the VE-500A will tune only to the stored channels .

10.TV/CATV BUTTON

Used to select regular 69 channel Broadcast TV (TV) or 125 Channel Cable TV (STD), (HRC) Cable, or (IRC) Cable.

-11-

Page 11
Image 11
Audiovox VE-500A operation manual Remote Control Functions, Power ON/OFF