Wiring Diagram Hook Up Procedure
1)Connect the power harness to the mating connector on the video pod.
2)Connect the power harness to the vehicle’s electrical system by tapping into an accessory hot line.
3)Verify all functions of the system before mounting of the finished assembly.
| Optional Remote | |
| Headphone |
|
| Stations |
|
Stereo Headphone |
|
|
Jack |
|
|
| Spade | Green |
| Terminals | (Right+) |
| Spade | Black |
| Terminals | (Ground) |
Stereo Headphone | Spade | Gray |
Jack | Terminals | (Left+) |
FM Modulator (p/n 1070610) and IR Wireless Headphones (p/n WHS100) could be connected with two dual patch cords connected to left and right RCA output jacks shown at right. Two RCA “Y” adapters are required for this application (p/n 0892165).
Antenna | Power Harness | |
TV antenna | ||
(If applicable) | Item 1 |
|
Red: +12 VDC | Black: Ground | |
(Accessory Cir.) |
| |
Antenna |
| Power |
| Connector | |
Connector |
| |
|
| Right Out |
|
| (Red) |
|
| Left Out |
|
| (White) |
7 |
|
|
