Audiovox Connecting Your VR-1 Basic Setup, Note When using RCA cables as shown above make sure

VR-1

Connecting Your VR-1;

Basic Setup

1.Use a set of red and white audio connection cables to connect the output of your source device (such as a cable box, satellite receiver, DVD player, VCR, etc.) to the INPUT of the VR-1.

2.Use another set of red and white connection cables (not included) to connect the OUTPUT of the VR-1 to the input of your TV or another signal control device (such as a stereo, home theater receiver, powered speakers, etc.).

3.Connect the A/C adapter to the DC input of the VR-1.

4.Plug the A/C adapter into a working electrical outlet.

Note: When using RCA cables as shown above make sure

2that you remove the coax cable from your TV.