Audiovox owner manual Connecting the VR-1 Tape Monitor Setup

VR-1

Connecting the VR-1;

Tape Monitor Setup

1.Use a set of red and white audio connection cables to connect the Tape Out of your stereo or home theater receiver to the INPUT of the VR-1.

2.Use another set of red and white connection cables (not included) to connect the OUTPUT of the VR-1 to the Tape Monitor input of your stereo or home theater receiver.

3.Connect the A/C adapter to the DC input of the VR-1.

4.Plug the A/C adapter into a working electrical outlet.

Note: You may need to enable the Tape Monitor feature on your stereo or home theater receiver. Please check the owner’s manual of your system to determine how to do this.

3