7

TYPICAL FM MODULATED INSTALLATION for

SRXM-001 SYSTEM COMPONENT LAYOUT

MOUNTING THE FM MODULATOR

Install the FM Modulator to the mounting surface with the
self-tapping screws (4mm x 12mm).
Self-Tapping
Phillips Head
Screw
Ground (BLACK)
Attach this wire to the chassis of the car. Be
sure that the surface is free of paint and is
not rusty. If a proper ground connection is
not made, the SRXM-001 System may not
operate correctly and stray noise may be
picked up by the unit.
FM Modulator
FM Radio
DIN Cable
To FM Radio
Antenna input
RRU
SCU
From Existing
Vehicle Antenna
Satellite Radio
Antenna
(Purchased
Separately)
+12V Battery
(YELLOW)
Connect this wire to
a terminal which is
always energized.
+12V Accessory / Ignition (RED)
Connect this wire to a terminal which
is energized when the ignition switch
is turned to the "ON" or "ACCESSORY"
position.
Filter Box
& Fuses
13-Pin
DIN Cable
RCA to RCA
Cable