Troubleshooting, If this happens, Try this

Troubleshooting

If this happens	Try this

My XM radio is not receiving a signal.	Use the “antenna aiming” feature on the XM ra-
	dio and move the antenna to another location.

My XM radio will not turn on.	Check whether the power cord is plugged into
	the wall.
	If applicable, make sure Auto-ON is enabled.

I only receive XM channels 0 and 1.	Make sure your radio is activated. Contact XM
	at www.xmradio.com or 1-800-XM-RADIO.

The radio and Sound System are on and receiv-	Remove the radio from the Sound System and
ing a signal but I can’t hear anything.	re-insert it, then turn the power on.
	Unplug any headphones.
	Check the volume control.
	Make sure mute is not set on the remote if
	used.
	Make sure aux mode is o.

I hear noise or interference.	Move away from any cordless telephones or
	electrical appliances or other devices that may
	cause interference.

My remote doesn’t work.	Make sure that the IR sensors are not ob-
	structed.
	It may be time to replace the battery in the
	remote.
The minimum volume level is too loud or the	Adjust the line out level on your XM Radio.
maximum volume is too quiet.