What’s in the Box?
| info | display | menu | |
| | mute | + | Cassett Adaptor |
| 1 | 2 | 3 |
| 4 | 5 | 6 | |
| 7 | 8 | 9 | |
XpressRC | jump | 0 | fav | Swivel Mount |
| Remote Control | Preparation Kit |
| |
Swivel Mount
Car Power Adapter
Car Cradle
WARNINGS:
•When using this product it is always important to keep your eyes on the road and hands on the wheel. Not doing so could result in personal injury, death, and/or damage to your XpressRC Receiver, accessories, and/or to your vehicle or other property.
•XpressRC should be placed in your vehicle where it will not interfere with the function of safety features, e.g., deployment of airbags. Failure to correctly place Xpress may result in injury to you or others if the unit becomes detached during an accident and/or obstructs the deploy- ment of an airbag.
XpressRC functions
60-Minute Replay Buttons
Pause and replay up to 60 minutes of live XM broadcast.
Number Keys | Info | Jump |
Enter a channel | Displays either your | Switches between |
directly, select your | personal stock or info | current channel and |
favorite channels, or | extras information. | previous channel. |
access songs saved | | |
in SongSaver. | | |
Display
Customize the way you view content on the display
Power Button
XM Button
Confirms selection for channel and menu items, also press and hold to GameSelect, to TuneSelect or to save a song.
Left and Right Arrows
Search for channels by category.
5-way Navigation
Knob
Previews channels; also selects various menu options.
Menu
Access advanced features and configuration options.
Fav
Choose among direct channel entry, favorite channels, and SongSaver mode.
5-way navigation knob
•Turn the knob to scroll through a list.
•Press the center of the XM button to make a selection.
•Press the edge of the XM button to select display, jump, 
or 
.
Press center button Toggle right | Toggle left | Toggle up | Toggle down |
(XM button) | | | |
Vehicle Installation
Step 1: Mount the XM Antenna
1Choose the best location for your XM antenna considering your own personal situation. Pay particular attention to any accessories that you may have like luggage racks and how
frequently you may use them. | Magnet |
The XM antenna contains a strong magnet which will stick to any metal parts of your vehicle.
If you placed the XM antenna on the front of the vehicle, route the cable across the top of the windshield. Gently pry up the rubber weather seal and tuck the cable underneath. Follow the weather seal down to the door jam. Tuck the cable into the door jam and up to the dash or under the carpet to the car cradle as shown.
If you placed the XM antenna on the rear of the vehicle, route the cable under the weather seal of the rear window. Route it into the trunk and through any existing wire passages or cargo passages to the rear passenger compartment. Tuck the cable under the door jam trim or under the carpet to the radio as shown.
TIP! Always be careful to include enough slack in your cable to accommodate open doors or trunk lids. Use things typically found around the home, like electrical tape, to secure cables in areas so that hinges do not pinch the cable with the door. Hide any excess cable in the trim.
Step 2: Install the vent or swivel mount
You can use either the vent mount or the swivel mount for your XpressRC depending on your particular situation.
Installing the vent mount
1Locate a vent with horizontal slats sturdy enough to hold your XM cradle and radio.
2Adjust the clamps to fit your vent.
3Snap the mount onto the vent.
To remove, push the mount into the vent, then lift up.
Vent Mount
Extra Adhesive
Pad
Swivel Mount
Installing the swivel mount
CAUTION: The adhesive used with the swivel mount may make it difficult to remove. Do not install this mount on leather surfaces and make sure the air temperature is at least 60°F (15°C).
1Locate a flat surface for the mount. Make sure there is ample room for the XM cradle and radio when installed.
2Clean the surface with the preparation kit and let it dry thoroughly.
3Peel off the adhesive liner. Position, press, and hold the swivel mount in place for 30 seconds.
IMPORTANT: Let the adhesive cure for 24 hours before attaching the XM cradle and radio to the mount.
4Turn the swivel to accommodate the XM cradle and radio. Adjust the tension via the center screw.
You can adjust this screw to adjust the tension of the mount with a screwdriver.
To remove, carefully lift the adhesive pad with your fingers or a spoon. Warming the pad with a hair dryer for several minutes will help soften the adhesive.
You can reinstall the swivel mount using the extra adhesive pad.
Step 3: Connect your XpressRC
1Plug the antenna into ANT IN on the cradle.
2Plug the power adapter into DC IN on the cradle.
3Plug the audio adapter into AUDIO OUT on the cradle.
•Use the Cassette Adapter if your vehicle has a built-in cassette player.
•Use a mini audio cable (sold separately) if your vehicle has an audio input jack.
4Insert the cradle into the mount.
5Insert your XpressRC into the cradle.
NOTE: If your car does not contain a cassette player or an audio input, you will need to use either the XM SureConnect (sold separately) or the FM Direct adapter (sold separately).
•XM SureConnect (sold separately): You can listen to your XpressRC through your car stereo by using XpressRC’s built-in FM modulator and the XM SureConnect. Simply find an unused FM frequency on the stereo and set your XpressRC to transmit on that same frequency. Refer to Set the FM frequency page in your user guide for more information.
•FM Direct Adapter (sold separately): This option directly connects the XpressRC to your car’s audio system and antenna. A professional installation is recommended if you choose to use this method.
XpressRC Car Cradle
Power Adapter
XM Antenna
Cassette Adapter
