(As per the example, press and release 2 times to set the units digit to 2).

8.Turn the ignition switch to the off position. Immediately observe the LED flash pattern.

You will note the LED flashing five times, pause, and then flash two times, pause. This pattern will be repeated three times indicating the new code (52) has been accepted and stored in memory.

NOTE: If after step 7, the LED flashes a code other than what was just entered, this indicates that the code has not been changed. You will have to repeat steps 1 through 7 above being certain to note the following:

Acceptable digits 10ths or units are 1 through 9. The unit will not recognize a 0 (Zero), or no digit entered in any place, units or tenths.

NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code.

MANUALLY OVERRIDING YOUR SYSTEM:

USING THE CUSTOM CODE OVERRIDE

Assuming the override code programmed has not been changed, and the default override code of 11 is in the system's memory.

1) Enter the vehicle and turn the ignition switch to the on position. NOTE: The siren will sound.

2) Within 5 seconds, press and release the PBLED switch 1 time.

3) Within 5 seconds, turn the ignition switch off then on.

4) Within 5 seconds, press and release the PBLED switch 1 time.

5) Turn the ignition switch off then on and start the vehicle.

NOTE: If you have changed the programmed override code then substitute your new code tenths for step 2 above, and units for step 5 above.

ELIMINATING THE NORMAL ARM/DISARM CHIRPS

You can selectively eliminate the normal arm & disarm chirps by holding the transmitter button slightly longer when arming or disarming. This will prevent the siren chirps for one arm or disarm cycle. If you find this inconvenient and wish to eliminate these chirps permanently,

1. Turn the ignition switch 'on" then 'off".

3. Within 10 seconds of turning off the ignition, press and release the PBLED switch 3 times.

4. If the chirps were on before you started, the siren will emit 2 short chirps indicating that the chirps are now off. If the chirps were off before you started, the siren will emit one short chirp indicating that the chirps are now on.

NOTE: If the vehicle battery is disconnected then reconnected, the unit will re- turn to the default setting of chirps on. Repeat the above procedure to eliminate the arm/disarm chirps.

NOTE: Whenever the chirps are bypassed, the 4-chirp intrusion indicator and 3 chirp defective zone indicator will always operate. Since these are important warnings to you that something has happened, they cannot be eliminated.

NOTE: Your system must be programmed by the installation center to en- able this feature.

REMOTE PANIC OPERATION

The Lock or Unlock button on your keychain transmitter also functions as a panic switch for use in emergency situations. To use remote panic,

1.Press and hold the Lock or Unlock button on the keychain transmitter for 3 or more seconds. The alarm will immediately sound.

2.To stop the alarm, press and hold the Lock or Unlock button on the transmitter

Page 8

128-7863

8 of 20

Page 7 Page 9
Page 8
Image 8
Audiovox XR9000 owner manual Eliminating the Normal ARM/DISARM Chirps, Remote Panic Operation
Page 7 Page 9

XR9000 specifications

The Audiovox XR9000 is a standout model in the realm of portable audio systems, designed to deliver high-quality sound and an array of advanced features. This device appeals to audiophiles and casual listeners alike, making it a versatile addition to any sound system.

One of the key features of the Audiovox XR9000 is its impressive audio technology. Equipped with a powerful digital amplifier, it produces crystal-clear audio across a wide frequency range. This ensures that users can enjoy rich bass and crisp highs, contributing to a well-rounded listening experience. The system’s compact design does not compromise on sound quality, as it incorporates advanced speaker drivers that enhance acoustic performance.

The XR9000 supports a myriad of connectivity options, including Bluetooth, which allows users to stream music wirelessly from smartphones, tablets, and laptops. This feature offers unmatched convenience, letting listeners enjoy their favorite tracks without the hassle of cables. Furthermore, it is compatible with a range of audio formats, ensuring that users can play their music in the highest possible quality.

Another noteworthy characteristic of the Audiovox XR9000 is its intuitive user interface. The device features easy-to-navigate controls, enabling users to adjust the volume, change tracks, and switch between sources with minimal effort. Its LED display provides clear information about the current track and settings, keeping everything user-friendly.

Battery life is another strong point of the XR9000. With a robust rechargeable battery, users can enjoy hours of uninterrupted listening, making it perfect for outdoor gatherings, picnics, or road trips. Additionally, the device’s lightweight and portable design ensures it can easily be transported wherever it’s needed.

The Audiovox XR9000 also boasts impressive durability. Built with high-quality materials, it is designed to withstand the rigors of everyday use while maintaining performance. Whether you're using it indoors or out, you can trust that this audio system will deliver impressive sound without compromising on reliability.

In conclusion, the Audiovox XR9000 combines cutting-edge technology, user-friendly design, and exceptional sound quality, making it an excellent choice for those seeking a versatile audio solution. Whether you are at home or on the move, the XR9000 promises to enhance your listening experience.
Top Page Image Contents