Auralex Project Roominators Kit
Congratulations! You now have a higher quality listening environment.
The Auralex Project Roominators Kit is designed to reduce uncontrolled ambience in smaller home and project studios. Proper placement of the Studiofoam™ panels and LENRD™ Bass Traps will insure greater clarity in your listening environment. By following these simple instructions, you’ll end up with the best room you’ve never “heard.”
Roominators Project General Guidelines
For superior acoustics, Auralex suggests mounting LENRD™ Bass Traps in the corners of your room (for low frequency control) as well as 2’x2’ Studiofoam™ panels for absorption on the walls and ceiling.
If your room is set up with a mix position against one wall (as many rooms are), please use the following general guidelines:
A. Using Tubetak™, mount two (2) LENRD Bass Traps in each vertical corner. We suggest you install the LENRDs starting at the
ceiling. However, we understand that not all corners are the same. At the very least, place LENRDs in the upper most section of the vertical corners. If you have doors, windows or other obstacles blocking your corners, it is acceptable to place them in the horizontal, wall/ceiling corners.
| 8 - | Includes: |
| ||||
|
|
|
|
| |||
24 | - 2’ | LENRD™ | Bass |
|
| ||
x 2’ |
| Traps | |||||
| 5 | - |
|
| |||
|
| Studiofoam™ | panels | ||||
|
|
| TubeTak™ |
|
| ||
|
|
|
|
| Adhesives | ||
B. Using Tubetak, mount Studiofoam panels on the front wall, between and behind the nearfield monitors. The graphic below shows eight
(8)panels across the front wall. The pattern in your room does not have to be identical, but placement
across this wall is strongly encouraged.
