Avalon Stoves 21 TRV Push-Onface Brackets, Overview, Tile Retrofit Installations, Page 3 of

Avalon Hideaway Bungalow Face (95700121)

PUSH-ON FACE BRACKETS

N O T E : The push-on brackets are only compatible with the 21 TRV (2008 or later).

Overview

The optional push-on brackets allow the face to be installed up to 1” from the front of the fireplace. In addition, the new brackets allow the face to be installed straight-on to the fireplace. This permits the use of thick facing material directly above the face (no gap is required to slide the face into place).

Tile Retrofit Installations

If a 21 TRV is already installed into a standard drywall installation with the standard brackets, it is extremely difficult to install tile behind face (this requires the fireplace location to be moved forward). With the new push-on brackets, the face may be located up to 1” from the front of the fireplace, allowing tile or other non-combustible to be placed behind the face.

Bracket Installation

Remove the stock brackets and install the push-on brackets to the back of the face following the directions below.

The upper brackets are installed with the notch facing to the left (this insures the brackets are installed right side up)..

Note how the lower

brackets angle inwards.

Page 3 of 4 Printed April 16, 2008