Avalon Hideaway Bungalow Face (95700121)
Preparing the Fireplace for Thick Facing
The 21 TRV has a sliding heat shield that must be properly positioned when using thick facing. See the directions below for adjusting the heat shield.
Loosen these two nuts above | Slide the heat shield forward until it is flush with |
| |
the firebox (3/8” wrench). | the facing and tighten the nuts to secure. |
|
Face Installation and Removal
Face Attachment | Face Removal |
The upper slots have a spring-
tensioned lever that catches the
small teeth on the brackets.
Once the face is in place, open the access door and tighten this screw (5/16” wrench). This locks the face in place.
Pull the bottom of the face out then disengage the face from the frieplace.
Loosen the lower screws.
Page 4 of 4 |
|
|
|
|
|
|
| Printed April 16, 2008 |
| ||||||||
|
